Tuesday, August 29, 2017

Janamashtami - Celebration of Supreme Atman

Recently, Janamashtami was celebrated, I started to think that it should be more than a simple celebration of Lord Krishna’s birth. With this in mind, I started searching more on the subject. I came across an article that I felt touches the core of Hindu learning about oneself. The same is reproduced below in a simpler manner.
There is a deeper meaning to the story of Krishna’s birth. Devaki symbolizes the Body and Vasudev symbolizes the life force (Prana). When Prana rises in the Body, Joy (Krishna) is born. But the Ego (Kamsa) tries to eliminate joy. Kamsa is Devaki’s brother which indicates that ego is born along with the body. A person who is happy and joyful does not create trouble for anyone. It is the one who is unhappy and emotionally wounded who ends up causing disruption. Those who feel injustice has been done to them end up being unjust to others out of their hurt ego.
 The biggest adversary of ego is Joy. Ego cannot survive and has to bow down where there is joy and love. A person can hold a very high position in society, but he melts in front of his own little child. When the child falls ill, however strong the person is, they feel a little helpless. Ego simply melts when confronted with love, simplicity and joy. Krishna is the epitome of joy, the quintessence of simplicity and the very source of love.
 Devaki’s and Vasudev’s imprisonment by Kamsa signifies that when the ego takes over, the body feels like a prison. When Krishna was born, the prison guards fell asleep. The guards here are the senses which protect the ego because they are turned outward when awake. Inner joy sprouts in us when the senses turn inwards.
 Krishna is also known as the butter thief. Milk is the essence of nourishment and curd is a denser form of milk. When curd is churned, butter comes up and floats on top. It is nourishing and yet light, not heavy. When our intelligence is churned, it becomes like butter. When knowledge sprouts in the mind, one gets established in one’s Self. Such a person remains unattached to this world and his mind does not sink in it. Krishna stealing butter is a symbolism depicting the glory of love. So attractive is Krishna’s charm and skill that he steals the minds of even the most dispassionate.
 Why does Krishna have the peacock feather on his head? A king is responsible for the whole society and that responsibility can become a burden, which sits on the head as the crown. But Krishna fulfills all his responsibility effortlessly, like a game. A mother never feels taking care of her children is a burden. Similarly, Krishna wears his responsibility lightly and plays his roles colorfully, just like the peacock feather on his crown.
 Krishna is the most attractive, joyful space within all of us. When there is no restlessness, worry or desire in the mind, you are able to get deep rest. And it is in deep rest that Krishna is born.

Saturday, November 9, 2013

INDIAN FOOD SYSTEM (More precisely, South Indian but more or less applicable to all Indian meal systems)

The following are rough translations of the words of Kanchi Paramacharya extracted from the Tamil publication titled Sollin Selvar (The Expert of Words), Sri Kanchi Munivar by Sri Ra. Ganapathy. The different Indian delicacies are explained as follows :

"Our meal reminds us of our spiritual path from confused inaction to a clear flow of action and finally to the realized bliss of unity.


A typical South Indian Meal


SAMBHAR: Sambar is also known as kuzhambu in Tamil, a term that literally translates to ‘get confused’. Paramacharya explains how these three courses are related to the three gunas of spirituality: the confusion of sambar is tamo guna, the clarified and rarified flow of rasam is rajo guna and the all-white buttermilk is satva guna.

sAdam: Cooked rice, the main dish of a South Indian meal is called sAdam. That which has sat is sAdam, in the same way we call those who are full of sat, sadhus. We can give another explanation for the term: that which is born out of prasannam is prasAdam. What we offer to Swami (God) as nivedanam is given back to us as parasAdam. Since we should not add the root ‘pra’ to the rice we cook for ourselves, we call it sAdam.

RASAM: Rasam means juice, which is also the name of filtered ruchi. We say ‘it was full of rasa’ when a speech or song was tasteful. If something is an extraction of juice, then would it not be clear, diluted and free of sediments? Such is the nature of our rasam, which is clear and dilute. The other one, served earlier to rasam in a meal, is the kuzhambu. Kuzhambu contains dissolved tamarind and cut vegetable pieces, so it looks unclear, its ingredients not easily seen.

BUTTERMILK: A western meal normally ends with a dessert. In a South Indian meal, desserts such as pAyasam are served after the rasam sAdam. Any sweets that were served at the beginning are also taken at this time. After that we take buttermilk rice as our final course.

Paramacharya explains that since sweets are harmful to teeth, our sour and salty buttermilk actually strengthens our teeth, and this has been observed and praised by an American dietician. We gargle warm salt water when we get toothache. The buttermilk is the reason for our having strong teeth until the end of our life, unlike the westerners who resort to dentures quite early in their life.

UPPUMA: If the term uppuma is derived from the fact that we add uppu or salt, then we also add salt to iddly, dosa and pongal! Actually, it is not uppuma but ub
buma! The rava used for this dish expands in size to the full vessel where heated up with water and salt. The action of rava getting expanded is the reason for the term ubbuma.

LADDU: Ladanam (in Sanskrit) means to play, to throw. ladakam is the sports goods used to play with. Since the ball games are the most popular, ladakam came to mean a ball. The dish laddu is like a ball, and this term is a shortened form of laddukam, which derived from ladakam. Laddu is also known as kunjaa laadu. This should actually be gunjaa laadu, because the Sanskrit term gunjA refers to the gunjA-berry, used as a measure of weight, specially for gold. Since a laddu is a packed ball of gunjA like berries cooked out of flour and sugar, it got this name. The singer of mUka panca sati on Ambal Kamakshi describes her as Matangi and in that description praises her as ‘gunjA bhUsha’, that is, wearing chains and bangles made of gunjA-berries of gold.

PAYASAM: payas (in Sanskrit) means milk. So pAyasam literally means ‘a delicacy made of milk’. This term does not refer to the rice and jaggery used to make pAyasam. They go with the term without saying. Actually pAyasam is to be made by boiling rice in milk (not water) and adding jaggery. These days we have dhal pAyasam, ravA pAyasam, sEmia pAyasam and so on, using other things in the place of rice. Vaishanavas have a beautiful Tamil term akkaara adisil for pAyasam. The ‘akkaar’ in this term is a corruption of the Sanskrit sharkara. The English term ‘sugar’ is from the Arabian ‘sukkar’, which in turn is from this Sanskrit term. The same term also took the forms ‘saccharine’ and ‘jaggery’. And the name of the dish jangiri is from the term jaggery.

TAMBULAM: It is customary to have tAmbUlam at the end of a South Indian dinner. In the North, tAambUlam is popularly known as paan, which is usually a wrap of betel nut and other allied items in a calcium-laced pair of betel leaves. In the South, tAmbUlam is usually an elaborate and leisurely after-dinner activity. People sit around a plate of tAmbUlam items, drop a few cut or sliced betel nut pieces in their month, take the betel leaves one by one leisurely, draw a daub of pasty calcium on their back and then stuff them in their mouth, chatting happily all the while. The betel leaf is known by the name vetrilai in Tamil, literally an empty leaf.

Paramacharya once asked the people sitting around him the reason for calling it an empty leaf. When none could give the answer, he said that the usually edible plants don’t just stop with leaf; they proceed to blossom, and bear fruits or vegetables. Even in the case of spinach or lettuce, we have to cook them before we can take them. Only in the case of the betel leaf, we take it raw, and this plant just stops with its leaves, hence the name vetrilai or empty leaf."

It is very revealing that our forefathers designed our meals not only for nutrition but in a sequence for for our good health and a guide to our pathway to salvation!


Saturday, October 24, 2009

Concepts for a green world


I browse the web for interesting articles. I found one regarding the technologies for greening the earth. I found one on Wall street Journal by Micheal Totty. The link is here. http://tinyurl.com/yfwo33a .

I have reproduced the same below :


It's a tall order: Over the next few decades, the world will need to wean itself from dependence on fossil fuels and drastically reduce greenhouse gases. Current technology will take us only so far; major breakthroughs are required.What might those breakthroughs be? Here's a look at five technologies that, if successful, could radically change the world energy picture. They present enormous opportunities. The ability to tap power from space, for instance, could jump-start whole new industries. Technology that can trap and store carbon dioxide from coal-fired plants would rejuvenate older ones.

Success isn't assured, of course. The technologies present difficult engineering challenges, and some require big scientific leaps in lab-created materials or genetically modified plants. And innovations have to be delivered at a cost that doesn't make energy much more expensive. If all of that can be done, any one of these technologies could be a game-changer.

1. SPACE-BASED SOLAR POWER

For more than three decades, visionaries have imagined tapping solar power where the sun always shines—in space. If we could place giant solar panels in orbit around the Earth, and beam even a fraction of the available energy back to Earth, they could deliver non-stop electricity to any place on the planet.

Sunlight is reflected off giant orbiting mirrors to an array of photovoltaic cells; the light is converted to electricity and then changed into microwaves, which are beamed to earth. Ground-based antennas capture the microwave energy and convert it back to electricity, which is sent to the grid.

The technology may sound like science fiction, but it's simple: Solar panels in orbit about 22,000 miles up beam energy in the form of microwaves to earth, where it's turned into electricity and plugged into the grid. (The low-powered beams are considered safe.) A ground receiving station a mile in diameter could deliver about 1,000 megawatts—enough to power on average about 1 million U.S. homes.

The cost of sending solar collectors into space is the biggest obstacle, so it's necessary to design a system lightweight enough to require only a few launches. A handful of countries and companies aim to deliver space-based power as early as a decade from now.


ADVANCED CAR BATTERIES

Electrifying vehicles could slash petroleum use and help clean the air (if electric power shifts to low-carbon fuels like wind or nuclear). But it's going to take better batteries. In a lithium-air battery, oxygen flows through a porous carbon cathode and combines with lithium ions from a lithium-metal anode in the presence of an electrolyte, producing an electric charge. The reaction is aided by a catalyst, such as manganese oxide, to improve capacity.


Lithium-ion batteries, common in laptops, are favoured for next-generation plug-in hybrids and electric vehicles. They're more powerful than other auto batteries, but they're expensive and still don't go far on a charge; the Chevy Volt, a plug-in hybrid coming next year, can run about 40 miles on batteries alone. Ideally, electric cars will get closer to 400 miles on a charge. While improvements are possible, lithium-ion's potential is limited.

One alternative, lithium-air, promises 10 times the performance of lithium-ion batteries and could deliver about the same amount of energy, pound for pound, as gasoline. A lithium-air battery pulls oxygen from the air for its charge, so the device can be smaller and more lightweight. A handful of labs are working on the technology, but scientists think that without a breakthrough they could be a decade away from commercialization.

3. UTILITY STORAGE

Everybody's rooting for wind and solar power. How could you not? But wind and solar are use-it-or-lose-it resources. To make any kind of difference, they need better storage.

Battery packs located close to customers can store electricity from renewable wind or solar sources and supply power when the sun isn't shining or the wind isn't blowing. Energy is collected in the storage units and can be sent as needed directly to homes or businesses or out to the grid.

Scientists are attacking the problem from a host of angles—all of which are still problematic. One, for instance, uses power produced when the wind is blowing to compress air in underground chambers; the air is fed into gas-fired turbines to make them run more efficiently. One of the obstacles: finding big, usable, underground caverns.

Similarly, giant batteries can absorb wind energy for later use, but some existing technologies are expensive, and others aren't very efficient. While researchers are looking at new materials to improve performance, giant technical leaps aren't likely.

Lithium-ion technology may hold the greatest promise for grid storage, where it doesn't have as many limitations as for autos. As performance improves and prices come down, utilities could distribute small, powerful lithium-ion batteries around the edge of the grid, closer to customers. There, they could store excess power from renewables and help smooth small fluctuations in power, making the grid more efficient and reducing the need for backup fossil-fuel plants. And utilities can piggy-back on research efforts for vehicle batteries.

4. CARBON CAPTURE AND STORAGE

Keeping coal as an abundant source of power means slashing the amount of carbon dioxide it produces. That could mean new, more efficient power plants. But trapping C02 from existing plants—about two billion tons a year—would be the real game-changer.

Carbon dioxide is removed from smokestack gases and compressed. It's then pumped deep underground and stored in porous rock formations.

Techniques for modest-scale CO2 capture exist, but applying them to big power plants would reduce the plants' output by a third and double the cost of producing power. So scientists are looking into experimental technologies that could cut emissions by 90% while limiting cost increases.

Nearly all are in the early stages, and it's too early to tell which method will win out. One promising technique burns coal and purified oxygen in the form of a metal oxide, rather than air; this produces an easier-to-capture concentrated stream of CO2 with little loss of plant efficiency. The technology has been demonstrated in small-scale pilots, and will be tried in a one-megawatt test plant next year. But it might not be ready for commercial use until 2020.

5. NEXT-GENERATION BIOFUELS

One way to wean ourselves from oil is to come up with renewable sources of transportation fuel. That means a new generation of bio-fuels made from non-food crops.

Researchers are devising ways to turn lumber and crop wastes, garbage and inedible perennials like switchgrass into competitively priced fuels. But the most promising next-generation biofuel comes from algae.

Algae grow by taking in CO2, solar energy and other nutrients. They produce an oil that can be extracted and added into existing refining plants to make diesel, gasoline substitutes and other products. Algae grow fast, consume carbon dioxide and can generate more than 5,000 gallons a year per acre of bio-fuel, compared with 350 gallons a year for corn-based ethanol. Algae-based fuel can be added directly into existing refining and distribution systems; in theory, the U.S. could produce enough of it to meet all of the nation's transportation needs.

But it's early. Dozens of companies have begun pilot projects and small-scale production. But producing algae biofuels in quantity means finding reliable sources of inexpensive nutrients and water, managing pathogens that could reduce yield, and developing and cultivating the most productive algae strains.

The above concepts are only some of the thoughts of various people investigating for a greener future for the world. There are no time lines for these concepts. Maybe a better concept, not outlined above, comes out of the blue, much more radical but much more easy to commercialise.

We are, as always, operating with hope for a better future.